PartQuest Portal Subscription: Essential tier
You can add pins to a custom symbol of a PartQuest Portal part by uploading a comma-separated values (CSV) file that contains pin information.
Consult the table in the following Parameters section for accepted CSV headers and values. Note that the pin name is the only required field. You may fill in many details for some pins and leave others blank within a single CSV.
You can view an Excel-format example file (“PartQuest-PinListTemplate.xlsx”) and save a copy, in which you can enter your pin names and properties. When you have entered all the details, use the Excel Save As function to save the file as a CSV file.
Column Header |
Accepted Values |
Default Value (when not provided) |
---|---|---|
Name (required) |
(Up to 64 character alphanumeric string) |
N/A |
Pin # |
(Up to 32 character alphanumeric string) |
(Unpopulated) |
Inverted |
Yes, No |
No |
Direction |
In, Out, In/Out, N/A |
(Unpopulated) |
Elec. Function |
Signal, Ground, Power, No-Connect |
(Unpopulated) |
Elec. Type |
Digital, Analog |
(Unpopulated) |
Output Type |
Open Collector, Open Emitter, Tristate, Open Drain, N/A |
(Unpopulated) |
Connect. Type |
Load, Source, Terminator |
(Unpopulated) |
Implicit |
Yes, No |
No |
Clock |
Yes, No |
No |
Active High |
Yes, No |
No |
Active Low |
Yes, No |
No |
Hysteresis |
Yes, No |
No |
Enable |
Yes, No |
No |
Amplifier |
Yes, No |
No |
Passive Pull-up |
Yes, No |
No |
Passive Pull-down |
Yes, No |
No |
Rated Voltage |
Number in volts |
(Unpopulated) |
Power Dissipation |
Number in watts |
(Unpopulated) |
Side |
Left, Right, Top, Bottom |
Left |
Order |
Integer (1, 2, 3...) |
Order of CSV entry |